Televes Televes
Language: en | fr | de | it | pl | pt | ru | es

T.0X Encoder TWIN HDMI/Composite CVBS - COFDM/QAM

Ref. 563832

Additional Infomation
Product release: 
Technical manuals: 
Software y Firmware: 
Televés reserves the right to modify the product.The product may be different than shown in the picture.

Generate your own DTT content in High Definition

An encoder/modulator is a device which generates a Digital TV channel (multiplex) from A/V sources like cameras, PCs, or TVSAT receivers.

The encoder/modulator Ref. 563832 generates a HDTV channel with two services; each service can come from three different input formats (HDMI, YPbPr or composite CVBS).

On the other hand, Ref. 562822 generates 4 services from 4 different  analogue sources (CVBS).

Both modules are able to encode either in MPEG-2 or H.264(HDTV) format.

They can be configured with the PCT5.0 handset or using the Web Server incorporated in each module. This server enables a remote or local management and configuration.

The highest gain of the output signal (up to 115dBµV or 103dBµV with the loop-through active) avoid the need of using additional amplifiers.

You can choose between generating DVB-T (DTT) channels or DVB-C (QAM) to use in Cable TV operator networks.


  • User friendly configuration using an embedded web server.
  • Remote control through the Internet.
  • High output gain with no need of extra amplification.
  • Configurable COFDM or QAM output.
  • Enery efficient due to its low power consumption.


  • High quality output (MER>40dB).
  • Compatible with many formats, resolutions and TV screen dimensions.
  • Fully configurable modulation and codification parameters.
  • Compatible with multiple input signals: HDMI, CVBS, YPbPr, SPDIF audio (Ref. 563832), ...
  • HDCP (High-Bandwitdh Digital Content Protection) incorporated, can be disabled in case of having authorization from the TV provider.
Reference 563832
Video   2 sets 3 x RCA (Y, Pb, Pr)
2 sets 1 x RCA (CVBS)
Audio   2 sets 2 x RCA (L, R)
2 sets 1 x RCA (Digital)
2 sets 1 x Toslink (Optical)
Video + Audio   2 sets 1 x HDMI
Video Encoder
Output format MPEG-2 / H264
Resolution  480i, 480p, 576i, 576p,
720p, 1080i & 1080p
Auto-scan of input resolution
Aspect ratio 4:3, 16:9 and pass through
GOP   10, 12, 15, 16, 18, 20, 24 ó 30
Encoder Audio   
Aspect ratio Dolby Digital AC-3
(only Digital Loop)
or MPEG1 Layer2
(analogue input or HDMI PCM)
Sampling rate kHz 48
Frequency bands MHz 46...862
Output maximum level dBµV 115 (103 with active loop-through)
MER  dB >40
Spurious dBc -60
QAM Modulation 16, 32, 64, 128, 256
BaudRate Mbaud 6,9
Roll-off % 15
Code Reed Solomon
Spectrum mode Normal / Inverted
Frequency steps kHz 250
COFDM Modulation QPSK, 16QAM, 64QAM
Guard interval µS 1/4, 1/8, 1/16, 1/32
FEC  1/2, 2/3, 3/4, 5/6, 7/8
Bandwidth MHz 6, 7, 8
Cell_id  Configurable
Frequency steps kHz 125 / 166
PSI Transport Stream ID  Configurable
Original Network ID  Configurable
Network ID  Configurable
LCN  Configurable
NIT  Manual / Automatic
SDT  Manual / Automatic
LCN mode Generic / UK / NorDig V1 / NorDig V2
Network Name  Configurable
Service PID  Configurable
Service Name  Configurable
Service ID  Configurable
Power supply Vdc 24
Consumption W <20,4
Ingress Protection IP 20
Dimensions (W x H x D) mm 50 x 216 x 180


Additional Infomation
Product release: 
Technical manuals: 
Software y Firmware: 
Televes Televes